Vietnam Deep CNC Mirror Engraving | Custom Groove Fabrication
Vietnam Deep CNC Mirror Engraving and Custom Recessed Groove Processing
Can Mirrors Be Deep Engraved Using CNC?
THỦ ĐÔ GLASS provides CNC mirror groove processing in Vietnam and can evaluate custom recessed decorative patterns using customer-supplied drawings. Our principal fabrication facility is located in Hanoi.
Deep CNC engraving is a mechanical process that creates physical recesses in suitable mirror materials.
Unlike surface marking, the intended result is defined by groove geometry, including depth, width and cross-sectional shape.
Typical Applications
- Recessed decorative mirror lines.
- Geometric groove patterns.
- Artistic wall mirrors.
- Custom furniture mirror components.
- Special architectural mirror designs.
- Non-standard decorative mirror panels.
Each design must be evaluated against the material and available tooling.
Understanding Groove Depth
THỦ ĐÔ GLASS has CNC mirror-processing capabilities associated with recessed grooves of approximately 2–3 mm in suitable applications.
This range is not a universal specification for every mirror or pattern.
Achievable depth depends on the mirror thickness, groove width, tool geometry, pattern spacing and material condition.
A deeper groove also reduces the remaining thickness of the material at the machined area.
Technical Parameters for Deep Engraving
| Parameter | Why It Matters |
|---|---|
| Mirror thickness | Influences remaining material thickness |
| Groove depth | Affects machining feasibility and material strength |
| Groove width | Determines possible tooling and machining paths |
| Groove profile | Defines the required cross-sectional geometry |
| Corner radius | May be constrained by tool shape |
| Pattern spacing | Influences the amount of material remaining between grooves |
For non-standard groove profiles, a cross-sectional drawing is strongly recommended.
Why a Reference Image Is Not Enough
A photograph may show the intended visual appearance without providing measurable groove geometry.
For manufacturing, buyers should specify the dimensions of the groove itself.
For example, two decorative grooves may appear similar in a photograph but require different tooling because their cross-sections are different.
Technical Review Before Production
The evaluation process should establish whether the proposed groove geometry is compatible with the selected mirror.
If a design is unsuitable, the parties can discuss adjustments to depth, spacing or profile.
Complex patterns may require trial processing before a production arrangement is confirmed.
Frequently Asked Questions
Can a 3 mm deep groove be machined into every mirror?
No. The feasibility of a 3 mm groove depends on mirror thickness, material and pattern geometry.
Do you need a cross-sectional drawing?
For special groove profiles, a cross-section is highly recommended.
Can deep engraving be performed from a photograph?
A photograph can support initial discussions, but dimensioned drawings are needed for accurate technical evaluation.
Is deep CNC engraving suitable for all decorative mirror designs?
No. Brittle material behavior and tooling limitations must be considered.
Related Services
Explore CNC engraved mirror processing and our custom mirror OEM fabrication guide.
Contact THỦ ĐÔ GLASS
Send your mirror thickness, CAD drawing, groove depth, groove width, profile and required quantities for technical assessment.
THỦ ĐÔ GLASS Locations in Vietnam
Hanoi Headquarters: No. 15 Vuong Thua Vu Street, Thanh Xuan, Hanoi, Vietnam.
Hanoi Main Factory: Thanh Oai Industrial Cluster, Bich Hoa, Thanh Oai, Hanoi, Vietnam.
Nha Trang Location: No. 24, Street 18A, Ha Quang 2 Urban Area, Phuoc Hai, Nha Trang, Vietnam.
Da Nang Showroom: 74 Do Huy Uyen Street, Son Tra District, Da Nang, Vietnam.
Da Nang Production Workshop: 110, 29 Thang 3 Street, Hoa Xuan, Cam Le, Da Nang, Vietnam.
Ho Chi Minh City Factory: 1572 Nguyen Duy Trinh Street, former District 9, Thu Duc City, Ho Chi Minh City, Vietnam.
Can Tho Location: Street 9, Mien Nam Residential Area, Hung Phu, Cai Rang, Can Tho, Vietnam.
Contact Information
Phone / Zalo: +84 91 817 8386
WeChat: 091.871.8386
WhatsApp: +84 981 002 236
Website: https://guongkinhthudo.vn
Please message us first with the technical drawings and groove specifications for your project.
